Audio Technica AT-VM95C

€39

Audio Technica AT-VM95C

VM95 series Conical stereo cartridge
AT-VM95C VM95 series Conical stereo cartridge – Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT91, AT91R and CN5625AL

Audio Technica AT-VM95C

Features

VM95 series Conical stereo cartridge

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • Replacement for AT91, AT91R and CN5625AL

 

VM95 Series – Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges

  • The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
  • VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
  • Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
  • The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
  • The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

 

ATN-XP7

ATN-XP5

ATN-XP3

Conical Bonded Stylus

The benefit of conical styli, even if the cartridge is “lean

Specifications

Cartridge & Stylus
Frequency Response20 – 20,000 Hz
Channel Separation18 dB (1 kHz)
Vertical Tracking Angle23°
Vertical Tracking Force1.8 to 2.2g (2.0g standard)
Stylus ConstructionBonded Round Shank
Recommended Load Impedance47,000 Ω
Coil Impedance3.3 kΩ (1 kHz)
DC Resistance485 Ω
Coil Inductance550 mH (1 kHz)
Output Voltage4.0 mV (@ 1 kHz, 5 cm/sec)
Output Channel Balance2.5 dB (1 kHz)
Stylus ShapeConical
CantileverAluminium Pipe
Static Compliance17 x 10 – 6 cm / dyne
Dynamic Compliance6.5 x 10 – 6 cm / dyne (100 Hz)
Mounting1/2” centres
Cartridge Weight6.1g
Dimensions17.2 x 18.9 x 28.3 ( H x W x D mm)
Accessories IncludedTwo 11 mm installation screws;
Two 8 mm installation screws;
Two washers
ModelAT-VM95C
Recommended Load Capacitance100-200 pF
Replacement StylusAT-VMN95C
Stylus Size0.6 mil
TypeVM Stereo Dual Magnet
Wire Used for CoilT.P. Copper

SOUND ODYSSEY BV
Brandstraat 28
9255 Buggenhout
Belgium

BTW BE0756.538.632

Sound Odyssey place picture
5.0
Based on 19 reviews