€179
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
AT-VMN95C
AT-VMN95E
AT-VMN95EN
AT-VMN95ML
AT-VMN95SH
AT-VMN95SP
ATN-XP7
ATN-XP5
ATN-XP3
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.
Cartridge & Stylus | |
---|---|
Frequency Response | 20 – 25,000 Hz |
Channel Separation | 23 dB (1 kHz) |
Vertical Tracking Angle | 23° |
Vertical Tracking Force | 1.8 to 2.2g (2.0g standard) |
Stylus Construction | Nude Square Shank |
Recommended Load Impedance | 47,000 Ω |
Coil Impedance | 3.3 kΩ (1 kHz) |
DC Resistance | 485 Ω |
Coil Inductance | 550 mH (1 kHz) |
Output Voltage | 3.5 mV (@ 1 kHz, 5 cm/sec) |
Output Channel Balance | 1.5 dB (1 kHz) |
Stylus Shape | Microlinear |
Cantilever | Aluminium Pipe |
Static Compliance | 20 x 10 – 6 cm / dyne |
Dynamic Compliance | 10 x 10 – 6 cm / dyne (100 Hz) |
Mounting | 1/2” centres |
Cartridge Weight | 6.1g |
Dimensions | 17.2 x 18.9 x 28.3 ( H x W x D mm) |
Accessories Included | Two 11 mm installation screws; Two 8 mm installation screws; Two washers Non-magnetic screwdriver |
Model | AT-VM95ML |
Recommended Load Capacitance | 100-200 pF |
Replacement Stylus | AT-VMN95ML |
Stylus Size | 2.2 x 0.12 mil |
Type | VM Stereo Dual Magnet |
Wire Used for Coil | T.P. Copper |
SOUND ODYSSEY BV
Brandstraat 28
9255 Buggenhout
Belgium