JVC DLA-NZ800
The DLA-NZ800 brings JVC’s Gen3 D-ILA devices and Gen2 8K/e-shiftX together. Three native 4K panels are driven by an 8K scaling engine to place 8,192 x 4,320 pixels on screen, while a BLU-Escent laser provides 2,700 lumens and a native contrast ratio of 100,000:1. The all-glass 65 mm lens and x2 motorised zoom give generous placement freedom, and the wide colour filter reaches 98% of DCI-P3 and 73% of BT.2020.
Specifications
| e-shift | 2nd generation 8K/e-shiftX |
|---|---|
| Display resolution | 8,192 x 4,320 (Gen2 8K/e-shiftX) |
| Brightness | 2,700 lumens |
| Native contrast | 100,000:1 |
| Lens | 65 mm all-glass, x2 motorised zoom and focus |
| Lens shift | Vertical ±80%, horizontal ±34% (motorised, 16:9) |
| Screen size | 60″ to 300″ diagonal |
| Colour gamut | DCI 98% / BT.2020 73% |
| HDMI | 2x (48 Gbps, HDCP 2.3) |
| Control | RS-232C (D-sub 9-pin), trigger (mini jack, 12 V), 3D synchro |
| Power consumption | 440 W in use |
| Fan noise | 24 dB (laser at minimum) |
| Dimensions (WxHxD) | 500 x 234 x 505 mm, including feet |
| Weight | 23.1 kg |
| D-ILA device | 0.69-inch native 4K D-ILA (4096 x 2160) x3 |
| Light source | BLU-Escent laser diode, approx. 20,000 hours |
| Dynamic contrast | ∞:1 |
| LAN | 1x RJ-45 |
| Service | 1x USB Type A, for firmware updates and settings backup |
| Standby power | 0.3 W eco mode, 1.5 W networked standby |
| Power supply | AC 100-240 V, 50/60 Hz |
Prices include VAT. A projector of this calibre deserves to be seen before it is bought — we can demonstrate it in our atelier and advise on screen, throw distance and installation.
