Minimises noise and achieves maximum silence, building on the digital source
reproduction technology and knowhow accumulated over many years.
Available on backorder
Some systems use a digital link between source component and pre-amplifier, keeping the digital signal pure as long as possible: Technics Digital Link goes further. It has eliminated the volume control function from the pre-amplifier, and instead transmits the volume control information, together with the audio signal, directly to the power amplifier in digital form. The power amp’s jitter reduction circuit reduces any effect of jitter in signal transmission, then performs the volume control immediately before the PWM converter.
This new sound transmission interface, Technics Digital Link, supports audio signals and also eradicates inter-channel effects by transmitting the left and right channel signals separately. Technics Digital Link has achieved an ideal amplifier configuration, minimising any degradation between the pre-amplifier and the power amp, and resulting in superb stereo separation and reproduction of even the most subtle signals. The result is a more detailed and dynamic sound.
The SU-R1 Network Audio Control Player receives audio signals from various digital content devices, such as NAS, PCs, USB memory devices and digital interfaces. Many of these digital content storage systems were originally designed for use with PCs, so low noise – which is required for pure audio reproduction – was never a main design concern. To handle these often noisy sources, the SU-R1 isolates the interfaces for these media to exclude external electrical interference, and also employs a jitter remover, thus offering clear and stable sound, free from noise and distortion.
Common Mode Filter
SPDIF Pulse Transformer
Power Conditioner (USB-A)
Power Conditioner (USB-B)
Dedicated low-noise R-core transformers* with excellent regulation characteristics are used for the analogue and digital circuits, and the power supply is further isolated to exclude any digital noise from the analogue circuits. *R-core transformer is a trademark of Kitamura Kiden Co., Ltd.
The Technics Music App enables you to select a music source and playback equipment, and create playlists easily and comfortably on the screen of a tablet or smartphone. The Music App screen displays the music stored on a connected DLNA-compatible server, content stored on the device running the App, and music files on connected USB memory devices, giving you integrated playback control. Used with the SE-R1 or SU-C700, the Technics Music App not only allows you to control the volume and playback operations, but also lets you adjust the Bass, Mid and Treble levels.
*1 Unable to include USB memory as multi device playlist.
*2 Will not function when using Bluetooth® as a music source.
An oversampling digital filter, incorporating an original Technics algorithm, shifts digital noise to -160 dB or lower, thus moving any potential distortion far beyond hearing and leaving a rich, detailed sound.
Virtual Battery Operation removes noise generated by the power supply circuit by using a capacitor to fulfil the function of a battery: during playback, this capacitor provides the power, taking the charging system out of circuit, and preventing supply noise from mixing into the audio signal.
The SU-R1 features Digital Noise Isolation Architecture, a high-precision clock generator and independent high-precision Burr-Brown PCM1792 (Texas Instruments) digital to analogue converters for left and right channels. The circuits after the D/A converter are of a balanced configuration, using non-magnetic film resistors, low equivalent series resistance capacitors and a high-quality LME49720 (Texas Instruments) OP amp. Analogue inputs are converted to digital with the high-precision Burr-Brown PCM4220 (Texas Instruments) 192-kHz/24-bit A/D converter, allowing high-purity sound with digital and analogue sources alike.
I / V Conversion, Analogue Output Nonmagnetic Carbon Film Resistor
Power Supply Circuit Low-magnification Foil Electrolytic Capacitor,
Aluminium Foil Capacitor, Large-capacity Capacitor
Technics has developed signal processing to increase both sampling frequency and bit-depth: the High Res Re-master system converts audio signals to high-resolution at up to 192 kHz/32 bits, to bring the listener closer to the original music.
The Optimally Activated Circuit System allows the shutdown of various digital modules – such as those used for display, network, USB and digital interfaces – to minimise the noise generated when music is playing.
The pre-amp section supports a wide range of digital input — DLNA, USB memory devices, USB-DAC, SPDIF, AES/EBU — and two sets of analogue line signals. It converts analogue signals to 192-kHz/24-bit PCM signals using the high-precision A/D converter. The full-digital system achieves high-purity reproduction from any content. The USB-DAC supports 384-kHz/32-bit PCM, 2.8-MHz/5.6-MHz DSD native playback (analogue output) and asynchronous transmission. The digital input supports coaxial 192-kHz/24-bit PCM and optical 96-kHz/24-bit. For DLNA/USB memory device playback, DSD (2.8-MHz/5.6-MHz), WAV/AIFF/FLAC of up to 192 kHz 24 bits, and ALAC of up to 96 kHz 24 bits can be reproduced.
|Input Terminal||File Format||Sample Rate||Bit Depth||Bit Rate|
|Network / USB-A||MP3||32 / 44.1 / 48 kHz||16 bit||16-320 kbps|
|WMA||32 / 44.1 / 48 kHz||16 bit||16-320 kbps|
|AAC||32 / 44.1 / 48 / 88.2 / 96 kHz||16 bit||16-320 kbps|
|WAV||32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz||16 / 24 bit||–|
|FLAC||32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz||16 / 24 bit||–|
|AIFF||32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz||16 / 24 bit||–|
|ALAC||32 / 44.1 / 48 / 88.2 / 96 kHz||16 / 24 bit||–|
|DSD||2.8224 / 5.6448 MHz||1 bit||–|
|Digital AES / EBU Input||PCM||32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz||16 / 24 bit||–|
|Digital Coaxial Input||PCM||32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz||16 / 24 bit||–|
|Digital Optical Input||PCM||32 / 44.1 / 48 / 88.2 / 96 kHz||16 / 24 bit||–|
|USB-B||PCM||32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 / 352.8 / 384 kHz||16 / 24 / 32 bit||–|
|DSD||2.8224 / 5.6448 MHz||1 bit||–|
AirPlay, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
“Direct Stream Digital”, DSD and their logos are trademarks of Sony Corporation.
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.