Audio Technica AT-VM95C

39

Audio Technica AT-VM95C

VM95 series Conical stereo cartridge
AT-VM95C VM95 series Conical stereo cartridge – Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT91, AT91R and CN5625AL

Audio Technica AT-VM95C

Features

VM95 series Conical stereo cartridge

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • Replacement for AT91, AT91R and CN5625AL

 

VM95 Series – Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges

  • The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
  • VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
  • Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
  • The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
  • The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

 

ATN-XP7

ATN-XP5

ATN-XP3

Conical Bonded Stylus

The benefit of conical styli, even if the cartridge is “lean

Specifications

Cartridge & Stylus
Frequency Response20 – 20,000 Hz
Channel Separation18 dB (1 kHz)
Vertical Tracking Angle23°
Vertical Tracking Force1.8 to 2.2g (2.0g standard)
Stylus ConstructionBonded Round Shank
Recommended Load Impedance47,000 Ω
Coil Impedance3.3 kΩ (1 kHz)
DC Resistance485 Ω
Coil Inductance550 mH (1 kHz)
Output Voltage4.0 mV (@ 1 kHz, 5 cm/sec)
Output Channel Balance2.5 dB (1 kHz)
Stylus ShapeConical
CantileverAluminium Pipe
Static Compliance17 x 10 – 6 cm / dyne
Dynamic Compliance6.5 x 10 – 6 cm / dyne (100 Hz)
Mounting1/2” centres
Cartridge Weight6.1g
Dimensions17.2 x 18.9 x 28.3 ( H x W x D mm)
Accessories IncludedTwo 11 mm installation screws;
Two 8 mm installation screws;
Two washers
ModelAT-VM95C
Recommended Load Capacitance100-200 pF
Replacement StylusAT-VMN95C
Stylus Size0.6 mil
TypeVM Stereo Dual Magnet
Wire Used for CoilT.P. Copper